Talking about the Four Basic Links of Correctly Installing Outdoor LED Billboards

- Feb 18, 2019-

Outdoor LED billboards have the advantages of good stability, low consumption, wide radiation range, etc., and are used in outdoor information dissemination, which is the most suitable product. Basically, common LED displays have advertising screens, text screens, graphic screens, etc., which are also the first choice for urban life and brightness.

Then, when building such a high-quality LED advertisement outdoors, what details should be paid attention to? I believe that these contents are the topics that everyone is most concerned about, especially for some technical construction personnel, knowing that outdoor construction and maintenance of advertising screens will promote Business advertising, information dissemination. Specifically, the outdoor billboard LED electronic display is installed with four steps: field survey, equipment construction, installation and commissioning.

First, field survey

This refers to the test of the specific environment, topography, radiant radiation range, brightness acceptance and other parameters before the installation of the outdoor LED display. In order to ensure the smooth installation of the billboard, it is required to The commander carries out a unified lifting plan to ensure that the equipment can be used normally and stably.

Second, LED equipment construction

When building outdoor LED billboards, it is necessary to distinguish between wall advertising screens, hanging advertising screens and roof-type advertising screens. In actual installation, it should be segmented and hoisted by crane and hoist according to the height of the distance, and at the same time ensure that the above personnel cooperate with each other, and there is a better installation and use process for the LED advertising screen for aerial work.

Third, the illuminating radiation range debugging

Next, it is necessary to carry out specific radiation range detection. Due to the different radiation ranges, the LED display screens have different viewing angles. The outdoor LED display installation work should be carried out according to the field acceptance ability and the normal viewing angle range to ensure that each angle is far away. Looking far away, you can see normal, brightness-balanced images and subtitle information.

Fourth, follow-up testing and maintenance

Subsequent testing, including numerous ranges, such as LED display waterproofing, heat sink layer, LED indicating waterproof coating, rain cover on the display screen, heat dissipation on both sides, power supply line, etc., these basic parts and components constitute the entire stability Good graphic LED display, post-technical maintenance, it is necessary to carry out unified management and maintenance of these components. When the product is rusted, unstable or damaged, it needs to be replaced in time to ensure the safe use of the entire display.

In general, outdoor LED billboards use high-tech backplane heat dissipation and dot matrix light source for unified management, which is more conducive to the use of display screens. These basic outdoor advertising screen installation steps are once again explained in the LED display installation. The important link, mastering these, will allow us to use the advertising display more smoothly and quickly, and to play its excellent characteristics of information dissemination.